Sound is one of the components of our life, and a person hears it everywhere. In order to consider this phenomenon in more detail, we first need to understand the concept itself. To do this, you need to turn to the encyclopedia, where it is written that "sound is elastic waves propagating in any elastic medium and creating mechanical vibrations in it." Speaking more plain language are the audible vibrations in a medium. The main characteristics of the sound depend on what it is. First of all, the speed of propagation, for example, in water is different from another medium.

Any sound analogue has certain properties (physical features) and qualities (reflection of these features in human sensations). For example, duration-duration, frequency-pitch, composition-timbre, and so on.

The speed of sound in water is much higher than, say, in air. Therefore, it spreads faster and is much farther audible. This happens because of the high molecular density of the aqueous medium. It is 800 times denser than air and steel. It follows that the propagation of sound depends largely on the medium. Let's look at specific numbers. So, the speed of sound in water is 1430 m/s, in air - 331.5 m/s.

Low-frequency sound, such as the sound of a running ship's engine, is always heard a little before the ship enters the field of view. Its speed depends on several things. If the temperature of the water rises, then naturally the speed of sound in the water rises. The same happens with an increase in water salinity and pressure, which increases with increasing depth of the water space. Such a phenomenon as thermal wedges can have a special role on speed. These are places where layers of water of different temperatures meet.

Also in such places it is different (due to the difference in temperature conditions). And when sound waves pass through such layers of different density, they lose most of their strength. Faced with a thermocline, the sound wave is partially, and sometimes completely, reflected (the degree of reflection depends on the angle at which the sound falls), after which, on the other side of this place, a shadow zone is formed. If we consider an example when a sound source is located in the water space above the thermocline, then it will be almost impossible to hear something even lower.

Which are published above the surface, are never heard in the water itself. And vice versa happens when under the water layer: it does not sound above it. A striking example of this is modern divers. Their hearing is greatly reduced due to the fact that water affects and the high speed of sound in water reduces the quality of determining the direction from which it is moving. This dulls the stereophonic ability to perceive sound.

Under a layer of water, they enter the human ear most of all through the bones of the cranium of the head, and not, as in the atmosphere, through the eardrums. The result of this process is its perception simultaneously by both ears. The human brain is not able at this time to distinguish the places where the signals come from, and in what intensity. The result is the emergence of consciousness that the sound, as it were, rolls from all sides at the same time, although this is far from being the case.

In addition to the above, sound waves in the water space have such qualities as absorption, divergence and scattering. The first is when the strength of sound in salt water gradually disappears due to the friction of the aquatic environment and the salts in it. Divergence is manifested in the removal of sound from its source. It seems to dissolve in space like light, and as a result, its intensity drops significantly. And fluctuations completely disappear due to scattering on all sorts of obstacles, inhomogeneities of the medium.

Sound propagation speed

If mechanical vibrations of its particles (compression and rarefaction) are excited in sea water, then, due to the interaction between them, these vibrations will begin to propagate in water from particle to particle with a certain speed with. The process of propagation of vibrations in space is called wave. The particles of the liquid in which the wave propagates are not carried by the wave, they only oscillate around their equilibrium positions. Depending on the direction of particle oscillations with respect to the direction of wave propagation, there are longitudinal and transverse waves. In water, only longitudinal waves can arise, i.e., those waves in which particles oscillate along the direction of wave propagation. Longitudinal waves are associated with volumetric deformation of an elastic medium. The formation of transverse waves (particles oscillate in the direction transverse to propagation) does not occur in water due to the fact that they occur only in a medium that is able to resist shear deformation. Water does not have this property.

sound waves are called weak perturbations propagating in water - oscillations with small amplitudes.

The process of propagation of sound waves (sound speed), due to the high frequency of oscillations, it is adiabatic, that is, it is not accompanied by heat exchange. In this regard, sea water, from the point of view of acoustics, is similar to an ideal gas. Unlike air, sea water weakly absorbs the energy of sound vibrations. In addition, the speed of sound in water is practically independent of the oscillation frequency, i.e., there is no wave dispersion.

As is known from physics, the speed of sound propagation in a continuous elastic medium is determined by the formula:

where K \u003d - \u003d p 0 - (f / f) | - adiabatic bulk module

elasticity, po is the density of the unperturbed medium, kn is the coefficient of adiabatic compressibility. Due to the fact that both the bulk modulus of elasticity K and the density of undisturbed sea water po depend on its salinity, temperature and hydrostatic pressure, the speed of sound is also determined by these state parameters (Fig. 5.4).

Rice. 5.4. Dependence of sea water sound speed (m s 1) on salinity and temperature at atmospheric pressure (a), pressure and temperature at S=35 eps (b). US-80 was used in calculations

Pressure, dbar

Let us transform formula (5.10) in such a way that it includes quantities convenient for calculations. To do this, we rewrite the derivative in (5.10) as follows:

Comparing this expression with (5.7), we get:

where v - specific volume, k - coefficient of isothermal liquefied p

possible, y=- - the ratio of specific heat capacities at

constant pressure and volume, respectively.

Equation (5.11), if using the equation of state US-80, can be modified:

where Г is the adiabatic temperature gradient.

Formula (5.12) is used to calculate the speed of sound and is called theoretical. It was used to compile the famous Matthews sound speed tables, as well as O.I. Mamaev and some others.

Along with the theoretical formula (5.12), there are empirical formulas for determining the speed of sound based on modern laboratory methods for measuring it. The most reliable of them can be considered the formulas of V. Wilson, V. Del Grosso and K. Chen-F. Millero.

The closest in terms of the calculated values of the speed of sound to the theoretical ones using the US-80 is the latter. It looks like:

40 eps (PShS-78), temperatures - from 0 to 40 ° C (MShPT-68) and pressure - from 0 to 1000 bar. Pressure R enters (5.14) in bars.

The change in sea water temperature makes the greatest contribution to the change in the speed of sound propagation. As it increases, the elastic modulus K increases and the density p0 decreases, which, according to (5.10), leads to an increase in the speed of sound. In this case, the change in speed with a change in temperature by 1°C decreases at high temperatures compared to low ones.

Salinity has less effect on the speed of sound. It is noted that the salts contained in sea water have a different effect on the bulk modulus of elasticity, i.e., on K, and, consequently, on the speed of sound. As salinity increases, as does temperature, the speed of sound increases. The speed of sound also increases with increasing pressure.

Rice. 5.5.

For oceans, where a decrease in water temperature is noted with depth, a decrease in the speed of sound is characteristic. However, starting from a certain depth, the increase in hydrostatic pressure outweighs the role of water temperature and the speed of sound begins to increase. Thus, a layer with minimum sound speeds is formed on a certain horizon - underwater sound channel(Fig. 5.5). In it, due to refraction, sound rays sent horizontally are concentrated in the layer of minimum velocity and propagate over very long distances (up to 15,000-18,000 km).

The average value of the speed of sound in the oceans is approximately 1500 ms. The distribution of the speed of sound in the ocean is described in more detail in the work.

Tasks and questions for review

5.1. What is the bulk modulus of elasticity?
5.2. Why is adiabatic compressibility less than isothermal?
5.3. How does the coefficient of isothermal compressibility depend on the salinity, temperature and pressure of sea water?
5.4. Find how the internal energy changes during adiabatic compression?

Answer:

We apply the method of Jacobians - formulas 2.59, 2.60, 2.61, 2.63, 2.67, 2.69, 2.70, 2.71 and 2.72. We have:

All parameters are positive, therefore -\u003e 0, i.e. when

dr 1 h

adiabatic compression increases the internal energy. This is explained by the fact that at a constant entropy (heat exchange with environment absent) with an increase in external pressure, the average distance between molecules decreases, their average kinetic energy increases, and, consequently, the temperature increases.

5.5. What waves are called sound waves?
5.6. What affects the speed of sound in sea water?
5.7. Due to which an underwater sound channel is formed in the ocean.

Sound travels 4.5 times faster in sea water than in air. The speed of its propagation depends on temperature, salinity and pressure. With an increase in any of these factors, the speed of sound increases.

How is the speed of sound measured?

It can be calculated from temperature, salinity and depth, the three main characteristics measured at oceanographic stations. For many years this method was the only one. In recent years, the speed of sound in sea water has been measured directly. Sound speed meters work on the principle of measuring the length of time for which a sound pulse travels a certain distance.

How far can sound travel in the ocean?

Sound vibrations from an underwater explosion produced by the Columbia University research vessel Vema in 1960 were recorded at a distance of 12,000 miles. A depth charge was detonated in an underwater sound channel off the coast of Australia, and after about 144 minutes, sound waves reached Bermuda, that is, almost the opposite point of the globe.

What is an audio channel?

This is a zone in which the speed of sound first decreases with depth to a certain minimum, and then increases due to an increase in pressure. The sound waves excited in this zone cannot leave it, since they return to the channel axis by bending. Once in such a channel, sound can travel thousands of miles.

What is SOFAR?

It's an abbreviation English words"sound fixing and ranging" (detection of sound sources and measuring the distance to them). The SOFAR system uses a sound channel at depths of 600 - 1200 m. By notches from several receiving stations, it is possible to determine the location of the sound source in this channel with an accuracy of 1 mile. During the Second World War, with the help of this system, it was possible to save many pilots shot down over the sea. Their planes had small bombs that exploded under pressure when they reached the depth of the sound channel.

What is a sonar?

Sonar works on the same principle as radar, but instead of radio waves, it uses sound (acoustic) waves. Sonar can be active or passive. An active system emits sound vibrations and receives a reflected signal, or echo. To determine the distance, one must take half the product of the speed of sound and the time elapsed between the emission of a sound pulse and the reception of a reflected signal. The passive system works in listening mode, and it can only determine the direction in which the sound source is located. Sonar is used for submarine detection, navigation, finding schools of fish, and for determining depth. In the latter case, the sonar is a conventional echo sounder.

What is refraction and reflection of sound waves?

Due to differences in the density of sea water, sound waves in the ocean do not propagate in a straight line. Their direction is bent due to a change in the speed of sound in water. This phenomenon is called refraction. In addition, sound energy is scattered on suspensions and marine organisms, reflected from the surface and the bottom and scattered on them, and, finally, is attenuated when propagating through the water column.

What causes the sounds of the sea?

Sea noise includes the sounds of waves and surf, the noise caused by precipitation, seismic and volcanic activity, and finally the sounds made by fish and other marine organisms. Noises caused by the movement of the vessel, the operation of mechanisms that extract minerals, as well as noise generated during underwater and surface oceanographic works that occur outside the platforms themselves and measuring equipment, are also considered marine noise.

Waves, tides, currents

Why do waves arise?

Those waves; which we are accustomed to seeing on the surface of the water, are formed mainly by the action of the wind. However, waves can also be caused by other causes: underwater earthquakes or underwater volcanic eruptions. Tides are also waves.

Sound waves propagate in sea water in the form of vibrations, or waves, of pressure. These are mechanical longitudinal waves. In an elastic medium, which is sea water, they generate periodic compression and rarefaction of particles, as a result of which each particle moves parallel to the direction of wave propagation. The elasticity of the medium is characterized by wave acoustic resistance, defined as the product of the density of the medium and the speed of propagation of sound waves. This ratio makes it possible to estimate the rigidity of the medium, which is 3500 times greater for sea water than for air. Therefore, much less energy is required to create the same pressure in sea water as in air.

The propagation velocity of elastic longitudinal waves is the velocity of sound propagation. In sea water, the speed of sound ranges from 1450 to 1540 m/s. With an oscillation frequency of 16 to 20,000 Hz, they are perceived by the human ear. Vibrations above the threshold of hearing are called ultrasound", The properties of ultrasound are due to the high frequency and short wavelength. Vibrations with a frequency below the threshold of hearing are called infrasound. Sound waves in the marine environment are excited by natural and artificial sources. Among the former, sea waves, wind, accumulations of marine animals and their movement, water movements in zones of divergence and convergence, earthquakes, etc. play an important role. human activities.

Sound waves in sea water travel at different speeds. It depends on many factors, among which the most important are depth (pressure), temperature, salinity, internal structure of the water column, uneven distribution of density, gas bubbles, suspended particles, accumulations of marine organisms. The speed of sound propagation is also influenced by the rapidly changing state of the sea surface, bottom relief and composition.

Rice. 72. Change in the speed of sound depending on temperature and salinity at normal atmospheric pressure (a) and on pressure at 0 °C and salinity

35%o ( b)(by 127|)

bottom sediments. These factors form inhomogeneous acoustic fields, which give rise to a different direction of propagation and the magnitude of the speed of sound waves. The greatest influence on the speed of propagation of sound waves is exerted by pressure, temperature and salinity of sea water. These characteristics determine the compressibility coefficient, and its fluctuations cause a change in the speed of sound propagation. As the temperature increases, the specific volume of sea water increases, and the compressibility coefficient decreases, and this leads to an increase in the speed of sound. In surface waters, with an increase in temperature from O to 5 °, the increment in the speed of sound changes by approximately 4.1 m / s, from 5 to 10 ° - by 3.6 m / s, and at 30 ° C - by only 2.1 m / s with .

The speed of sound increases with a simultaneous increase in temperature, salinity and depth (pressure). The dependence is expressed by a linear change in the values of these parameters (Fig. 72). It has been established that an increase in salinity by 1% s and pressure by 100 dbar increases the speed of sound by approximately 1.2 and 1.6 m/s, respectively. From Table. 30, which shows data on the effect of temperature and salinity on the speed of sound propagation, it follows that with an increase in salinity at the same temperature, a significant increase in the speed of sound occurs. This growth is especially noticeable with a simultaneous increase in temperature and salinity of sea water.

If the water temperature changes little with depth, as happens in the Red Sea and the Weddell Sea, then the speed of sound increases without a sharp decrease in the range from 700 to 1300 m. In the vast majority of other areas of the World Ocean, a significant decrease in the speed of sound is observed in this depth interval ( Fig. 73).

Table 30

Speed of sound propagation in sea water (m/s) as a function of salinity and temperature

(simplified version of Table 1.41 1511)

The gradient of change in the speed of sound in the water column is not the same in the horizontal and vertical directions. In the horizontal direction, it is about a thousand times smaller than the vertical one. As noted by L.M. Brekhovskikh and Yu.P. Lysanov, the exception is the areas of convergence of warm and cold currents, where these gradients are comparable.

Since temperature and salinity do not depend on depth, the vertical gradient is a constant value. At a speed of sound of 1450 m/s, it is equal to 0.1110 -4 m~".

The pressure of the water column has a significant effect on the speed of sound propagation. The speed of sound increases with depth. This is clearly seen from Table. 31 for sound speed corrections for depth.

The sound speed correction for depth in the surface water layer is 0.2 m/s, and at a depth of 900 m it is 15.1 m/s, i.e. increases by 75 times. In the deeper layers of the water column

the correction for the speed of sound becomes much smaller and its value gradually decreases with increasing depth, although in absolute terms it is significantly

Rice. 73. The change in the speed of sound with depth in some areas of the World Ocean (by ) exceeds the correction for the speed of sound in the surface layer. For example, at a depth of 5000 m it is 443 times greater than for the surface layer.

Table 31

Sound speed correction (m/s) to depth

(simplified version of Table 1.42 151 ])

Depth, m	Depth, m
Depth, m